.. _lbl-dldb_damage_FEMA_P58_2nd_D_20_22

*************************************************
D.20.22 - Domestic Water Distribution - Hot Water
*************************************************

The following models are available:


.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.011a</b> | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC A or B, PIPING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Normal
| Seismic Installation Conditions: SDC A or B (no seismic design)
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.011a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.011b</b> | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC A or B, BRACING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Normal
| Seismic Installation Conditions: SDC A or B (no seismic design)
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.011b.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.012a</b> | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC C, PIPING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Normal
| Seismic Installation Conditions: SDC C (low seismic design)
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.012a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.012b</b> | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC C, BRACING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Normal
| Seismic Installation Conditions: SDC C (low seismic design)
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.012b.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.013a</b> | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC D, E, or F, PIPING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Normal
| Seismic Installation Conditions: SDC D, E, F (high seismic design)
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.013a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.013b</b> | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC D, E, or F, BRACING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Normal
| Seismic Installation Conditions: SDC D, E, F (high seismic design)
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.013b.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.014a</b> | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC D, E, or F (OSHPD or sim), PIPING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Special Regulations (e.g. OSHPD) for Piping Installations
| Seismic Installation Conditions: SDC D, E, F (high seismic design)
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.014a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.014b</b> | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC D, E, or F (OSHPD or sim), BRACING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Special Regulations (e.g. OSHPD) for Piping Installations
| Seismic Installation Conditions: SDC D, E, F (high seismic design)
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.014b.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.021a</b> | Heating hot Water Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC A or B, PIPING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Normal
| Seismic Installation Conditions: SDC A or B (no seismic design)
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.021a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.022a</b> | Heating hot Water Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC C, PIPING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Normal
| Seismic Installation Conditions: SDC C (low seismic design)
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.022a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.023a</b> | Heating hot Water Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC D, E, or F, PIPING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Normal
| Seismic Installation Conditions: SDC D, E, F (high seismic design
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.023a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.023b</b> | Heating hot Water Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC D, E, or F, BRACING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Normal
| Seismic Installation Conditions: SDC D, E, F (high seismic design
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.023b.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.024a</b> | Heating hot Water Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC D, E, or F (OSHPD or sim), PIPING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Special Regulation (e.g. OSHPD) for Piping Installations
| Seismic Installation Conditions: SDC D, E, F (high seismic design)
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.024a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.20.22.024b</b> | Heating hot Water Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC D, E, or F (OSHPD or sim), BRACING FRAGILITY</p> 
   <div>

| Heating water.  Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
| Construction Quality: Special Regulation (e.g. OSHPD) for Piping Installations
| Seismic Installation Conditions: SDC D, E, F (high seismic design)
| Notes: Consequence is for piping only.  Enter floor wetting consequence seperately.  Cost includes allowance for MEP relocation to perform work.


Suggested Block Size: 1000 LF 



.. raw:: html
   :file: D.20.22.024b.html

.. raw:: html

   <hr>