.. _lbl-dldb_damage_FEMA_P58_2nd_D_50_12

*********************************************************
D.50.12 - Electrical Service & Distribution - Low Tension
*********************************************************

The following models are available:


.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.013a</b> | Motor Control Center - Capacity: all - Unanchored equipment that is not vibration isolated - Equipment fragility only</p> 
   <div>

| Costing is per unit.
| Construction Quality: Normal - Not designed for seismic loads
| Seismic Installation Conditions: Unanchored equipment that is not vibration isolated


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.013a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.013b</b> | Motor Control Center - Capacity: all - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Anchorage fragility only</p> 
   <div>

| Costing is per unit.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.013b.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.013c</b> | Motor Control Center - Capacity: all - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Equipment fragility only</p> 
   <div>

| Costing is per unit.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.013c.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.013d</b> | Motor Control Center - Capacity: all - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Combined anchorage/isolator & equipment fragility</p> 
   <div>

| Costing is per unit.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.013d.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.021a</b> | Low Voltage Switchgear - Capacity: 100 to <350 Amp - Unanchored equipment that is not vibration isolated - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 225 Amp.
| Construction Quality: Normal - Not designed for seismic loads
| Seismic Installation Conditions: Unanchored equipment that is not vibration isolated


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.021a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.021b</b> | Low Voltage Switchgear - Capacity: 350 to <750 Amp - Unanchored equipment that is not vibration isolated - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 400 Amp.
| Construction Quality: Normal - Not designed for seismic loads
| Seismic Installation Conditions: Unanchored equipment that is not vibration isolated


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.021b.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.021c</b> | Low Voltage Switchgear - Capacity: 750 to <1200 Amp - Unanchored equipment that is not vibration isolated - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 800 Amp.
| Construction Quality: Normal - Not designed for seismic loads
| Seismic Installation Conditions: Unanchored equipment that is not vibration isolated


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.021c.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.021d</b> | Low Voltage Switchgear - Capacity: 1200 to 2000 Amp - Unanchored equipment that is not vibration isolated - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 1600 Amp.
| Construction Quality: Normal - Not designed for seismic loads
| Seismic Installation Conditions: Unanchored equipment that is not vibration isolated


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.021d.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.023a</b> | Low Voltage Switchgear - Capacity: 100 to <350 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Anchorage fragility only</p> 
   <div>

| Costing is per unit and is based upon 225 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.023a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.023b</b> | Low Voltage Switchgear - Capacity: 100 to <350 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 225 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.023b.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.023c</b> | Low Voltage Switchgear - Capacity: 100 to <350 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Combined anchorage/isolator & equipment fragility</p> 
   <div>

| Costing is per unit and is based upon 225 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.023c.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.023d</b> | Low Voltage Switchgear - Capacity: 350 to <750 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Anchorage fragility only</p> 
   <div>

| Costing is per unit and is based upon 400 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.023d.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.023e</b> | Low Voltage Switchgear - Capacity: 350 to <750 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 400 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.023e.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.023f</b> | Low Voltage Switchgear - Capacity: 350 to <750 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Combined anchorage/isolator & equipment fragility</p> 
   <div>

| Costing is per unit and is based upon 400 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.023f.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.023g</b> | Low Voltage Switchgear - Capacity: 750 to <1200 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Anchorage fragility only</p> 
   <div>

| Costing is per unit and is based upon 800 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.023g.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.023h</b> | Low Voltage Switchgear - Capacity: 750 to <1200 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 800 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.023h.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.023i</b> | Low Voltage Switchgear - Capacity: 750 to <1200 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Combined anchorage/isolator & equipment fragility</p> 
   <div>

| Costing is per unit and is based upon 800 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.023i.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.023j</b> | Low Voltage Switchgear - Capacity: 1200 to 2000 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Anchorage fragility only</p> 
   <div>

| Costing is per unit and is based upon 1600 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.023j.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.023k</b> | Low Voltage Switchgear - Capacity: 1200 to 2000 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 1600 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.023k.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.023l</b> | Low Voltage Switchgear - Capacity: 1200 to 2000 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Combined anchorage/isolator & equipment fragility</p> 
   <div>

| Costing is per unit and is based upon 1600 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.023l.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.031a</b> | Distribution Panel - Capacity: 100 to <350 Amp - Unanchored equipment that is not vibration isolated - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 225 Amp.
| Construction Quality: Normal - Not designed for seismic loads
| Seismic Installation Conditions: Unanchored equipment that is not vibration isolated


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.031a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.031b</b> | Distribution Panel - Capacity: 350 to <750 Amp - Unanchored equipment that is not vibration isolated - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 400 Amp.
| Construction Quality: Normal - Not designed for seismic loads
| Seismic Installation Conditions: Unanchored equipment that is not vibration isolated


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.031b.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.031c</b> | Distribution Panel - Capacity: 750 to <1200 Amp - Unanchored equipment that is not vibration isolated - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 800 Amp.
| Construction Quality: Normal - Not designed for seismic loads
| Seismic Installation Conditions: Unanchored equipment that is not vibration isolated


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.031c.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.031d</b> | Distribution Panel - Capacity: 1200 to 2000 Amp - Unanchored equipment that is not vibration isolated - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 1600 Amp.
| Construction Quality: Normal - Not designed for seismic loads
| Seismic Installation Conditions: Unanchored equipment that is not vibration isolated


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.031d.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.033a</b> | Distribution Panel - Capacity: 100 to <350 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Anchorage fragility only</p> 
   <div>

| Costing is per unit and is based upon 225 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.033a.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.033b</b> | Distribution Panel - Capacity: 100 to <350 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 225 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.033b.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.033c</b> | Distribution Panel - Capacity: 100 to <350 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Combined anchorage/isolator & equipment fragility</p> 
   <div>

| Costing is per unit and is based upon 225 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.033c.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.033d</b> | Distribution Panel - Capacity: 350 to <750 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Anchorage fragility only</p> 
   <div>

| Costing is per unit and is based upon 400 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.033d.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.033e</b> | Distribution Panel - Capacity: 350 to <750 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 400 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.033e.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.033f</b> | Distribution Panel - Capacity: 350 to <750 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Combined anchorage/isolator & equipment fragility</p> 
   <div>

| Costing is per unit and is based upon 400 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.033f.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.033g</b> | Distribution Panel - Capacity: 750 to <1200 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Anchorage fragility only</p> 
   <div>

| Costing is per unit and is based upon 800 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.033g.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.033h</b> | Distribution Panel - Capacity: 750 to <1200 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 800 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.033h.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.033i</b> | Distribution Panel - Capacity: 750 to <1200 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Combined anchorage/isolator & equipment fragility</p> 
   <div>

| Costing is per unit and is based upon 800 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.033i.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.033j</b> | Distribution Panel - Capacity: 1200 to 2000 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Anchorage fragility only</p> 
   <div>

| Costing is per unit and is based upon 1600 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.033j.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.033k</b> | Distribution Panel - Capacity: 1200 to 2000 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Equipment fragility only</p> 
   <div>

| Costing is per unit and is based upon 1600 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.033k.html

.. raw:: html

   <hr>

.. raw:: html

   <p class="dl_comp_name"><b>D.50.12.033l</b> | Distribution Panel - Capacity: 1200 to 2000 Amp - Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints - Combined anchorage/isolator & equipment fragility</p> 
   <div>

| Costing is per unit and is based upon 1600 Amp.
| Construction Quality: Normal - Designed for seismic loads but no special seismic certification
| Seismic Installation Conditions: Equipment that is either hard anchored or is vibration isolated with seismic snubbers/restraints
| Notes: User to provide median demand and dispersion values.  The values listed are default PACT values and do not represent the response of this component.


Suggested Block Size: 1 EA (round up to integer quantity)



.. raw:: html
   :file: D.50.12.033l.html

.. raw:: html

   <hr>