D.20.22 - Domestic Water Distribution - Hot WaterΒΆ

The following models are available:

D.20.22.011a | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC A or B, PIPING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC A or B (no seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.011b | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC A or B, BRACING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC A or B (no seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.012a | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC C, PIPING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC C (low seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.012b | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC C, BRACING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC C (low seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.013a | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC D, E, or F, PIPING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.013b | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC D, E, or F, BRACING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.014a | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC D, E, or F (OSHPD or sim), PIPING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Special Regulations (e.g. OSHPD) for Piping Installations
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.014b | Heating hot Water Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC D, E, or F (OSHPD or sim), BRACING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Special Regulations (e.g. OSHPD) for Piping Installations
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.021a | Heating hot Water Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC A or B, PIPING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC A or B (no seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.022a | Heating hot Water Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC C, PIPING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC C (low seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.023a | Heating hot Water Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC D, E, or F, PIPING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC D, E, F (high seismic design
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.023b | Heating hot Water Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC D, E, or F, BRACING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC D, E, F (high seismic design
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.024a | Heating hot Water Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC D, E, or F (OSHPD or sim), PIPING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Special Regulation (e.g. OSHPD) for Piping Installations
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time

D.20.22.024b | Heating hot Water Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC D, E, or F (OSHPD or sim), BRACING FRAGILITY

Heating water. Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Special Regulation (e.g. OSHPD) for Piping Installations
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time