2.4.2. Reading the Log File

The sequence of tasks carried out by the backend applications is outlined in the log file produced by the workflow. For local runs, this log is displayed in the command terminal and is reproduced in a file named log.txt in the results/ directory. For remote runs through Tapis, this log file is named launcher.out and is located in the job archive folder on DesignSafe. This guide will explain how to understand the statements printed in the log file.

The following is an example log file for a successful workflow run. The workflow can be broken down into the following sections:

  1. Reading the configuration file:

    • lines 12-13: Identifies the path to the configuration file, which specifies the job details, and the application registry file, which lists all available applications.

    • lines 16-62: Reads the application registry file and displays all available applications.

    • lines 64-85: Reads the configuration file and displays the units, local application directory, remote application directory, reference directory, and the applications chosen for each workflow step. Any workflow steps that are skipped (excluded from the configuration file) are also listed here.

  2. Pre-processing building and event data:

    • line 93: Python command for executing the Building application, which creates the BIM files for each building asset.

      python "C:/rWHALE/applications/createBIM/CSV_to_BIM/CSV_to_BIM.py" "--buildingFile" "C:/rWHALE/earthquake_example/results/buildings1-2.json" "--Min" "1" "--Max" "2" "--buildingSourceFile" "C:/rWHALE/earthquake_example/input_data/input_params.csv" "--getRV"
      
    • line 103: Python command for executing the RegionalMapping application, which assigns events to each of the building assets.

      python "C:/rWHALE/applications/performRegionalMapping/NearestNeighborEvents/NNE.py" "--buildingFile" "C:/rWHALE/earthquake_example/results/buildings1-2.json" "--filenameEVENTgrid" "C:/rWHALE/earthquake_example/input_data/records/EventGrid.csv" "--samples" "2" "--neighbors" "1"
      
  3. Setting up and running simulations for each building asset:

  • line 111: Starts with the first building asset. In this first pass, the EVENT, SAM, EDP, SIM files corresponding to “1-BIM.json” are created.

  • line 118: Python command for executing the Event application, which creates the EVENT file for the building asset.

    python "C:/rWHALE/applications/createEVENT/SimCenterEvent/SimCenterEvent.py" "--filenameBIM" "1-BIM.json" "--filenameEVENT" "EVENT.json" "--pathEventData" "C:/rWHALE/earthquake_example/input_data/records/" "--getRV"
    
  • line 126: Python command for executing the Modeling application, which creates the SAM file for the building asset.

    python "C:/rWHALE/applications/createSAM/openSeesPyInput/OpenSeesPyInput.py" "--filenameBIM" "1-BIM.json" "--filenameEVENT" "EVENT.json" "--filenameSAM" "SAM.json" "--mainScript" "cantilever.py" "--modelPath" "C:/rWHALE/earthquake_example/input_data/model/" "--ndm" "3" "--dofMap" "1,2,3" "--getRV"
    
  • line 134: Python command for executing the EDP application, which creates the EDP file for the building asset.

    python "C:/rWHALE/applications/createEDP/userEDP_R/UserDefinedEDP.py" "--filenameBIM" "1-BIM.json" "--filenameEVENT" "EVENT.json" "--filenameSAM" "SAM.json" "--filenameEDP" "EDP.json" "--EDPspecs" "C:/rWHALE/earthquake_example/input_data/EDP_specs.json" "--getRV"
    
  • line 142: Python command for executing the Simulation application, which creates the SIM file for the building asset.

    python "C:/rWHALE/applications/performSIMULATION/openSeesPy/OpenSeesPySimulation.py" "--filenameBIM" "1-BIM.json" "--filenameSAM" "SAM.json" "--filenameEVENT" "EVENT.json" "--filenameEDP" "EDP.json" "--filenameSIM" "SIM.json" "--getRV"
    
  • lines 153-157: Commands that are written to the workflow driver file. In a “second pass” through the workflow, these commands are executed by running the workflow driver file.

    python "C:/rWHALE/applications/createBIM/CSV_to_BIM/CSV_to_BIM.py" "--buildingFile" "C:/rWHALE/earthquake_example/results/buildings1-2.json" "--Min" "1" "--Max" "2" "--buildingSourceFile" "C:/rWHALE/earthquake_example/input_data/input_params.csv"
    python "C:/rWHALE/applications/createEVENT/SimCenterEvent/SimCenterEvent.py" "--filenameBIM" "1-BIM.json" "--filenameEVENT" "EVENT.json" "--pathEventData" "C:/rWHALE/earthquake_example/input_data/records/"
    python "C:/rWHALE/applications/createSAM/openSeesPyInput/OpenSeesPyInput.py" "--filenameBIM" "1-BIM.json" "--filenameEVENT" "EVENT.json" "--filenameSAM" "SAM.json" "--mainScript" "cantilever.py" "--modelPath" "C:/rWHALE/earthquake_example/input_data/model/" "--ndm" "3" "--dofMap" "1,2,3"
    python "C:/rWHALE/applications/createEDP/userEDP_R/UserDefinedEDP.py" "--filenameBIM" "1-BIM.json" "--filenameEVENT" "EVENT.json" "--filenameSAM" "SAM.json" "--filenameEDP" "EDP.json" "--EDPspecs" "C:/rWHALE/earthquake_example/input_data/EDP_specs.json"
    python "C:/rWHALE/applications/performSIMULATION/openSeesPy/OpenSeesPySimulation.py" "--filenameBIM" "1-BIM.json" "--filenameSAM" "SAM.json" "--filenameEVENT" "EVENT.json" "--filenameEDP" "EDP.json" "--filenameSIM" "SIM.json"
    
  • line 165: Python command for executing the UQ application, which executes the commands in the workflow driver file to sample random variables and perform the response simulation. This command creates the EDP output file for the building asset.

    python "C:/rWHALE/applications/performUQ/dakota/DakotaFEM.py" "--filenameBIM" "1-BIM.json" "--filenameSAM" "SAM.json" "--filenameEVENT" "EVENT.json" "--filenameEDP" "EDP.json" "--filenameSIM" "SIM.json" "--driverFile" "driver" "--method" "LHS" "--samples" "2" "--type" "UQ" "--concurrency" "1" "--keepSamples" "True" "--runType" "run"
    
  • line 189: dakota command which calls on DAKOTA to execute the UQ application.

    running Dakota:  dakota -input dakota.in -output dakota.out -error dakota.err
    
  • line 198: Python command for executing the DL application, which outputs the DM.csv and DV.csv for the building asset.

    python "C:/rWHALE/applications/performDL/pelicun/DL_calculation.py" "--filenameDL" "1-BIM.json" "--filenameEDP" "response.csv" "--outputEDP" "EDP.csv" "--outputDM" "DM.csv" "--outputDV" "DV.csv" "--DL_Method" "HAZUS MH EQ" "--Realizations" "2" "--detailed_results" "False" "--log_file" "True" "--coupled_EDP" "True" "--event_time" "off" "--ground_failure" "False"
    
  • line 213: Continues with the second building asset (“2-BIM.json”) and repeats the same workflow steps.

  1. Aggregate outputs for all building assets:

    • line 315: Aggregates results to create the EDP, DM, and DV output files.

      -----------------------------------------------------------
      Collecting damage and loss results
      Damage and loss results collected successfully.
      -----------------------------------------------------------
      

The full log file is shown below:

  1RDT workflow
  2
  32020-11-16T18:55:07Z System information
  4
  52020-11-16T18:55:07Z 	python: 3.7.9 (default, Aug 31 2020, 17:10:11) [MSC v.1916 64 bit (AMD64)]
  62020-11-16T18:55:07Z 	numpy: 1.19.2
  72020-11-16T18:55:07Z 	pandas: 1.1.2
  82020-11-16T18:55:07Z -----------------------------------------------------------
  92020-11-16T18:55:07Z Started running the workflow script
 102020-11-16T18:55:07Z -----------------------------------------------------------
 112020-11-16T18:55:07Z Inputs provided:
 122020-11-16T18:55:07Z 	workflow input file: C:/rWHALE/earthquake_example/rWHALE_config.json
 132020-11-16T18:55:07Z 	application registry file: C:/rWHALE/applications/Workflow/WorkflowApplications.json
 142020-11-16T18:55:07Z 	run type: run
 152020-11-16T18:55:07Z -----------------------------------------------------------
 162020-11-16T18:55:07Z Parsing application registry file
 172020-11-16T18:55:07Z 	Loading the json file...
 182020-11-16T18:55:07Z 	OK
 192020-11-16T18:55:07Z 	Collecting application data...
 202020-11-16T18:55:07Z 	OK
 212020-11-16T18:55:07Z 	Available applications:
 222020-11-16T18:55:07Z 		Building : GenericBimDatabase
 232020-11-16T18:55:07Z 		Building : GeoJSON_to_BIM
 242020-11-16T18:55:07Z 		Building : CSV_to_BIM
 252020-11-16T18:55:07Z 		RegionalMapping : NearestNeighborEvents
 262020-11-16T18:55:07Z 		Event : SimCenterEvent
 272020-11-16T18:55:07Z 		Event : ExistingSimCenterEvents
 282020-11-16T18:55:07Z 		Event : ExistingPEER_Events
 292020-11-16T18:55:07Z 		Event : Site Response
 302020-11-16T18:55:07Z 		Event : HazardBasedEvent
 312020-11-16T18:55:07Z 		Event : DEDM_HRP
 322020-11-16T18:55:07Z 		Event : LowRiseTPU
 332020-11-16T18:55:07Z 		Event : WindTunnelExperiment
 342020-11-16T18:55:07Z 		Event : StochasticWindWittigSinha
 352020-11-16T18:55:07Z 		Event : StochasticGroundMotion
 362020-11-16T18:55:07Z 		Event : CFDEvent
 372020-11-16T18:55:07Z 		Event : NNGM
 382020-11-16T18:55:07Z 		Event : LLNL-SW4
 392020-11-16T18:55:07Z 		Event : ASCE7_WindSpeed
 402020-11-16T18:55:07Z 		Event : pointWindSpeed
 412020-11-16T18:55:07Z 		Modeling : MDOF-LU
 422020-11-16T18:55:07Z 		Modeling : OpenSeesInput
 432020-11-16T18:55:07Z 		Modeling : OpenSeesPyInput
 442020-11-16T18:55:07Z 		Modeling : MDOF_BuildingModel
 452020-11-16T18:55:07Z 		Modeling : SteelBuildingModel
 462020-11-16T18:55:07Z 		EDP : StandardEarthquakeEDP
 472020-11-16T18:55:07Z 		EDP : StandardEarthquakeEDP_R
 482020-11-16T18:55:07Z 		EDP : StandardWindEDP
 492020-11-16T18:55:07Z 		EDP : StandardGMT_EDP
 502020-11-16T18:55:07Z 		EDP : UserDefinedEDP
 512020-11-16T18:55:07Z 		EDP : UserDefinedEDP_R
 522020-11-16T18:55:07Z 		EDP : SimpleEDP
 532020-11-16T18:55:07Z 		Simulation : OpenSees-Simulation
 542020-11-16T18:55:07Z 		Simulation : OpenSeesPy-Simulation
 552020-11-16T18:55:07Z 		Simulation : ExtractPGA
 562020-11-16T18:55:07Z 		Simulation : OpenSees-Simulation_R
 572020-11-16T18:55:07Z 		Simulation : IMasEDP
 582020-11-16T18:55:07Z 		UQ : Dakota-UQ
 592020-11-16T18:55:07Z 		UQ : Dakota-FEM
 602020-11-16T18:55:07Z 		UQ : Dakota-UQ1
 612020-11-16T18:55:07Z 		DL : pelicun
 622020-11-16T18:55:07Z Successfully parsed application registry
 632020-11-16T18:55:07Z -----------------------------------------------------------
 642020-11-16T18:55:07Z Parsing workflow input file
 652020-11-16T18:55:07Z 	Loading the json file...
 662020-11-16T18:55:07Z 	OK
 672020-11-16T18:55:07Z 	The following units were specified: 
 682020-11-16T18:55:07Z 		force: kips
 692020-11-16T18:55:07Z 		length: in
 702020-11-16T18:55:07Z 		time: sec
 712020-11-16T18:55:07Z 	Run dir : C:/rWHALE/earthquake_example/results
 722020-11-16T18:55:07Z 	Local applications dir : C:/rWHALE/
 732020-11-16T18:55:08Z 	Remote applications dir : C:/rWHALE/
 742020-11-16T18:55:08Z 	Reference dir : C:/rWHALE/earthquake_example/input_data/
 752020-11-16T18:55:08Z 	No RegionalEvent among requested applications.
 762020-11-16T18:55:08Z 	Requested workflow:
 772020-11-16T18:55:08Z 		Event : SimCenterEvent
 782020-11-16T18:55:08Z 		Building : CSV_to_BIM
 792020-11-16T18:55:08Z 		RegionalMapping : NearestNeighborEvents
 802020-11-16T18:55:08Z 		Modeling : OpenSeesPyInput
 812020-11-16T18:55:08Z 		EDP : UserDefinedEDP_R
 822020-11-16T18:55:08Z 		Simulation : OpenSeesPy-Simulation
 832020-11-16T18:55:08Z 		UQ : Dakota-UQ
 842020-11-16T18:55:08Z 		DL : pelicun
 852020-11-16T18:55:08Z Successfully parsed workflow inputs
 862020-11-16T18:55:08Z -----------------------------------------------------------
 872020-11-16T18:55:08Z Initializing the working directory.
 882020-11-16T18:55:08Z Working directory successfully initialized.
 892020-11-16T18:55:08Z -----------------------------------------------------------
 902020-11-16T18:55:08Z Creating files for individual buildings
 912020-11-16T18:55:08Z Creating initial building files...
 92
 93python "C:/rWHALE/applications/createBIM/CSV_to_BIM/CSV_to_BIM.py" "--buildingFile" "C:/rWHALE/earthquake_example/results/buildings1-2.json" "--Min" "1" "--Max" "2" "--buildingSourceFile" "C:/rWHALE/earthquake_example/input_data/input_params.csv" "--getRV" 
 94
 952020-11-16T18:55:09Z 	Output: 
 96
 97
 98
 992020-11-16T18:55:09Z Building files successfully created.
1002020-11-16T18:55:09Z -----------------------------------------------------------
1012020-11-16T18:55:09Z Creating regional mapping...
102
103python "C:/rWHALE/applications/performRegionalMapping/NearestNeighborEvents/NNE.py" "--buildingFile" "C:/rWHALE/earthquake_example/results/buildings1-2.json" "--filenameEVENTgrid" "C:/rWHALE/earthquake_example/input_data/records/EventGrid.csv" "--samples" "2" "--neighbors" "1" 
104
1052020-11-16T18:55:12Z 	Output: 
106
107
108
1092020-11-16T18:55:12Z Regional mapping successfully created.
1102020-11-16T18:55:12Z -----------------------------------------------------------
1112020-11-16T18:55:12Z {'id': '1', 'file': '1-BIM.json'}
1122020-11-16T18:55:12Z Initializing the simulation directory
1132020-11-16T18:55:12Z Simulation directory successfully initialized.
1142020-11-16T18:55:12Z -----------------------------------------------------------
1152020-11-16T18:55:12Z Creating files with random variables
1162020-11-16T18:55:12Z 	Running Event app for RV...
117
118python "C:/rWHALE/applications/createEVENT/SimCenterEvent/SimCenterEvent.py" "--filenameBIM" "1-BIM.json" "--filenameEVENT" "EVENT.json" "--pathEventData" "C:/rWHALE/earthquake_example/input_data/records/" "--getRV" 
119
1202020-11-16T18:55:12Z 	Output: 
121
122
123
1242020-11-16T18:55:12Z 	Running Modeling app for RV...
125
126python "C:/rWHALE/applications/createSAM/openSeesPyInput/OpenSeesPyInput.py" "--filenameBIM" "1-BIM.json" "--filenameEVENT" "EVENT.json" "--filenameSAM" "SAM.json" "--mainScript" "cantilever.py" "--modelPath" "C:/rWHALE/earthquake_example/input_data/model/" "--ndm" "3" "--dofMap" "1,2,3" "--getRV" 
127
1282020-11-16T18:55:12Z 	Output: 
129
130
131
1322020-11-16T18:55:12Z 	Running EDP app for RV...
133
134python "C:/rWHALE/applications/createEDP/userEDP_R/UserDefinedEDP.py" "--filenameBIM" "1-BIM.json" "--filenameEVENT" "EVENT.json" "--filenameSAM" "SAM.json" "--filenameEDP" "EDP.json" "--EDPspecs" "C:/rWHALE/earthquake_example/input_data/EDP_specs.json" "--getRV" 
135
1362020-11-16T18:55:13Z 	Output: 
137
138
139
1402020-11-16T18:55:13Z 	Running Simulation app for RV...
141
142python "C:/rWHALE/applications/performSIMULATION/openSeesPy/OpenSeesPySimulation.py" "--filenameBIM" "1-BIM.json" "--filenameSAM" "SAM.json" "--filenameEVENT" "EVENT.json" "--filenameEDP" "EDP.json" "--filenameSIM" "SIM.json" "--getRV" 
143
1442020-11-16T18:55:13Z 	Output: 
145
146
147
1482020-11-16T18:55:13Z Files with random variables successfully created.
1492020-11-16T18:55:13Z -----------------------------------------------------------
1502020-11-16T18:55:13Z Creating the workflow driver file
1512020-11-16T18:55:13Z Workflow driver script:
152
153python "C:/rWHALE/applications/createBIM/CSV_to_BIM/CSV_to_BIM.py" "--buildingFile" "C:/rWHALE/earthquake_example/results/buildings1-2.json" "--Min" "1" "--Max" "2" "--buildingSourceFile" "C:/rWHALE/earthquake_example/input_data/input_params.csv" 
154python "C:/rWHALE/applications/createEVENT/SimCenterEvent/SimCenterEvent.py" "--filenameBIM" "1-BIM.json" "--filenameEVENT" "EVENT.json" "--pathEventData" "C:/rWHALE/earthquake_example/input_data/records/" 
155python "C:/rWHALE/applications/createSAM/openSeesPyInput/OpenSeesPyInput.py" "--filenameBIM" "1-BIM.json" "--filenameEVENT" "EVENT.json" "--filenameSAM" "SAM.json" "--mainScript" "cantilever.py" "--modelPath" "C:/rWHALE/earthquake_example/input_data/model/" "--ndm" "3" "--dofMap" "1,2,3" 
156python "C:/rWHALE/applications/createEDP/userEDP_R/UserDefinedEDP.py" "--filenameBIM" "1-BIM.json" "--filenameEVENT" "EVENT.json" "--filenameSAM" "SAM.json" "--filenameEDP" "EDP.json" "--EDPspecs" "C:/rWHALE/earthquake_example/input_data/EDP_specs.json" 
157python "C:/rWHALE/applications/performSIMULATION/openSeesPy/OpenSeesPySimulation.py" "--filenameBIM" "1-BIM.json" "--filenameSAM" "SAM.json" "--filenameEVENT" "EVENT.json" "--filenameEDP" "EDP.json" "--filenameSIM" "SIM.json" 
158
159
1602020-11-16T18:55:13Z Workflow driver file successfully created.
1612020-11-16T18:55:13Z -----------------------------------------------------------
1622020-11-16T18:55:13Z Running response simulation
1632020-11-16T18:55:13Z 	Simulation command:
164
165python "C:/rWHALE/applications/performUQ/dakota/DakotaFEM.py" "--filenameBIM" "1-BIM.json" "--filenameSAM" "SAM.json" "--filenameEVENT" "EVENT.json" "--filenameEDP" "EDP.json" "--filenameSIM" "SIM.json" "--driverFile" "driver" "--method" "LHS" "--samples" "2" "--type" "UQ" "--concurrency" "1" "--keepSamples" "True" "--runType" "run" 
166
1672020-11-16T18:55:18Z 	Output: 
168
169
170
171Parsing random variables...
172
1731-BIM.json:
174
175EVENT.json:
176
177	eventID | discrete set=['RSN1737x00000', 'RSN707x00001']
178
179SAM.json:
180
181ERROR: SIM.json file not found.
182
183EDP.json:
184
185['RSN1737x00000', 'RSN707x00001']
186
1872
188
189running Dakota:  dakota -input dakota.in -output dakota.out -error dakota.err
190
191
192
1932020-11-16T18:55:18Z Response simulation finished successfully.
1942020-11-16T18:55:18Z -----------------------------------------------------------
1952020-11-16T18:55:18Z Running damage and loss assessment
1962020-11-16T18:55:18Z 	Damage and loss assessment command:
197
198python "C:/rWHALE/applications/performDL/pelicun/DL_calculation.py" "--filenameDL" "1-BIM.json" "--filenameEDP" "response.csv" "--outputEDP" "EDP.csv" "--outputDM" "DM.csv" "--outputDV" "DV.csv" "--DL_Method" "HAZUS MH EQ" "--Realizations" "2" "--detailed_results" "False" "--log_file" "True" "--coupled_EDP" "True" "--event_time" "off" "--ground_failure" "False" 
199
2002020-11-16T18:55:18Z First line of DL_calculation
201
2022020-11-16T18:55:20Z Initializing pelicun calculation...
203
204WARNING No loss model defined in the BIM file. Trying to auto-populate.
205
206start creating the edp file
207
2082020-11-16T18:55:21Z pelicun calculation completed.
209
210
2112020-11-16T18:55:22Z Damage and loss assessment finished successfully.
2122020-11-16T18:55:22Z -----------------------------------------------------------
2132020-11-16T18:55:22Z {'id': '2', 'file': '2-BIM.json'}
2142020-11-16T18:55:22Z Initializing the simulation directory
2152020-11-16T18:55:22Z Simulation directory successfully initialized.
2162020-11-16T18:55:22Z -----------------------------------------------------------
2172020-11-16T18:55:22Z Creating files with random variables
2182020-11-16T18:55:22Z 	Running Event app for RV...
219
220python "C:/rWHALE/applications/createEVENT/SimCenterEvent/SimCenterEvent.py" "--filenameBIM" "2-BIM.json" "--filenameEVENT" "EVENT.json" "--pathEventData" "C:/rWHALE/earthquake_example/input_data/records/" "--getRV" 
221
2222020-11-16T18:55:22Z 	Output: 
223
224
225
2262020-11-16T18:55:22Z 	Running Modeling app for RV...
227
228python "C:/rWHALE/applications/createSAM/openSeesPyInput/OpenSeesPyInput.py" "--filenameBIM" "2-BIM.json" "--filenameEVENT" "EVENT.json" "--filenameSAM" "SAM.json" "--mainScript" "cantilever.py" "--modelPath" "C:/rWHALE/earthquake_example/input_data/model/" "--ndm" "3" "--dofMap" "1,2,3" "--getRV" 
229
2302020-11-16T18:55:22Z 	Output: 
231
232
233
2342020-11-16T18:55:22Z 	Running EDP app for RV...
235
236python "C:/rWHALE/applications/createEDP/userEDP_R/UserDefinedEDP.py" "--filenameBIM" "2-BIM.json" "--filenameEVENT" "EVENT.json" "--filenameSAM" "SAM.json" "--filenameEDP" "EDP.json" "--EDPspecs" "C:/rWHALE/earthquake_example/input_data/EDP_specs.json" "--getRV" 
237
2382020-11-16T18:55:22Z 	Output: 
239
240
241
2422020-11-16T18:55:22Z 	Running Simulation app for RV...
243
244python "C:/rWHALE/applications/performSIMULATION/openSeesPy/OpenSeesPySimulation.py" "--filenameBIM" "2-BIM.json" "--filenameSAM" "SAM.json" "--filenameEVENT" "EVENT.json" "--filenameEDP" "EDP.json" "--filenameSIM" "SIM.json" "--getRV" 
245
2462020-11-16T18:55:23Z 	Output: 
247
248
249
2502020-11-16T18:55:23Z Files with random variables successfully created.
2512020-11-16T18:55:23Z -----------------------------------------------------------
2522020-11-16T18:55:23Z Creating the workflow driver file
2532020-11-16T18:55:23Z Workflow driver script:
254
255python "C:/rWHALE/applications/createBIM/CSV_to_BIM/CSV_to_BIM.py" "--buildingFile" "C:/rWHALE/earthquake_example/results/buildings1-2.json" "--Min" "1" "--Max" "2" "--buildingSourceFile" "C:/rWHALE/earthquake_example/input_data/input_params.csv" 
256python "C:/rWHALE/applications/createEVENT/SimCenterEvent/SimCenterEvent.py" "--filenameBIM" "2-BIM.json" "--filenameEVENT" "EVENT.json" "--pathEventData" "C:/rWHALE/earthquake_example/input_data/records/" 
257python "C:/rWHALE/applications/createSAM/openSeesPyInput/OpenSeesPyInput.py" "--filenameBIM" "2-BIM.json" "--filenameEVENT" "EVENT.json" "--filenameSAM" "SAM.json" "--mainScript" "cantilever.py" "--modelPath" "C:/rWHALE/earthquake_example/input_data/model/" "--ndm" "3" "--dofMap" "1,2,3" 
258python "C:/rWHALE/applications/createEDP/userEDP_R/UserDefinedEDP.py" "--filenameBIM" "2-BIM.json" "--filenameEVENT" "EVENT.json" "--filenameSAM" "SAM.json" "--filenameEDP" "EDP.json" "--EDPspecs" "C:/rWHALE/earthquake_example/input_data/EDP_specs.json" 
259python "C:/rWHALE/applications/performSIMULATION/openSeesPy/OpenSeesPySimulation.py" "--filenameBIM" "2-BIM.json" "--filenameSAM" "SAM.json" "--filenameEVENT" "EVENT.json" "--filenameEDP" "EDP.json" "--filenameSIM" "SIM.json" 
260
261
2622020-11-16T18:55:23Z Workflow driver file successfully created.
2632020-11-16T18:55:23Z -----------------------------------------------------------
2642020-11-16T18:55:23Z Running response simulation
2652020-11-16T18:55:23Z 	Simulation command:
266
267python "C:/rWHALE/applications/performUQ/dakota/DakotaFEM.py" "--filenameBIM" "2-BIM.json" "--filenameSAM" "SAM.json" "--filenameEVENT" "EVENT.json" "--filenameEDP" "EDP.json" "--filenameSIM" "SIM.json" "--driverFile" "driver" "--method" "LHS" "--samples" "2" "--type" "UQ" "--concurrency" "1" "--keepSamples" "True" "--runType" "run" 
268
2692020-11-16T18:55:28Z 	Output: 
270
271
272
273Parsing random variables...
274
2752-BIM.json:
276
277EVENT.json:
278
279	eventID | discrete set=['RSN1737x00000', 'RSN707x00001']
280
281SAM.json:
282
283ERROR: SIM.json file not found.
284
285EDP.json:
286
287['RSN1737x00000', 'RSN707x00001']
288
2892
290
291running Dakota:  dakota -input dakota.in -output dakota.out -error dakota.err
292
293
294
2952020-11-16T18:55:28Z Response simulation finished successfully.
2962020-11-16T18:55:28Z -----------------------------------------------------------
2972020-11-16T18:55:28Z Running damage and loss assessment
2982020-11-16T18:55:28Z 	Damage and loss assessment command:
299
300python "C:/rWHALE/applications/performDL/pelicun/DL_calculation.py" "--filenameDL" "2-BIM.json" "--filenameEDP" "response.csv" "--outputEDP" "EDP.csv" "--outputDM" "DM.csv" "--outputDV" "DV.csv" "--DL_Method" "HAZUS MH EQ" "--Realizations" "2" "--detailed_results" "False" "--log_file" "True" "--coupled_EDP" "True" "--event_time" "off" "--ground_failure" "False" 
301
3022020-11-16T18:55:28Z First line of DL_calculation
303
3042020-11-16T18:55:31Z Initializing pelicun calculation...
305
306WARNING No loss model defined in the BIM file. Trying to auto-populate.
307
308start creating the edp file
309
3102020-11-16T18:55:32Z pelicun calculation completed.
311
312
3132020-11-16T18:55:32Z Damage and loss assessment finished successfully.
3142020-11-16T18:55:32Z -----------------------------------------------------------
3152020-11-16T18:55:32Z Collecting damage and loss results
3162020-11-16T18:55:32Z Damage and loss results collected successfully.
3172020-11-16T18:55:32Z -----------------------------------------------------------